Turkish Tile Adhesives
The right tile adhesive is determined by the substrate, the tile format, the exposure conditions and the time available on site — not by what happens to be in stock. Our range covers cement-based, resin-based and epoxy adhesive systems for ceramic, porcelain and natural stone, alongside a full selection of grouts classified to EN 12004 and EN 13888. From standard interior installations to highly deformable mortars for underfloor heating, fast-setting systems for time-critical programmes, and chemical-resistant epoxy grouts for industrial environments — the correct product exists within this range.
Cement Based Tile Adhesives
Cement based tile adhesives deliver strong, lasting bond performance for ceramic, porcelain, and natural stone applications, offering reliable workability, reduced slip, and secure adhesion on both interior and exterior surfaces.
- Tile Adhesive
- Ceramic Adhesive Mortar
- Dust-Free Ceramic Tile Adhesive
- Deformable Tile Adhesive
- Granite Tile Adhesive
- Highly Deformable Tile Adhesive
- Two Component Highly Deformable Tile Adhesive
- Fast Setting Tile Adhesive
- Tile Adhesive for Waterproofing Systems
- Fast Setting Pourable Tile Adhesive
- Lightweight Deformable Tile Adhesive
- Solvent-free Polyurethane Adhesive
- Quick-Setting Flexible Adhesive Mortar
- Aerated Concrete Adhesive
Resin Based Adhesives
Cement based tile adhesives deliver strong, lasting bond performance for ceramic, porcelain, and natural stone applications, offering reliable workability, reduced slip, and secure adhesion on both interior and exterior surfaces.
- Solvent-free Polyurethane Adhesive
- Epoxy Adhesive R2T
- Acrylic Adhesive
Grouts
Cement based tile adhesives deliver strong, lasting bond performance for ceramic, porcelain, and natural stone applications, offering reliable workability, reduced slip, and secure adhesion on both interior and exterior surfaces.
- Flexible Grouting Mortar (3-20 mm)
- Grouting Mortar (1-6 mm)
- Ready to Use Flexible Grouting Mortar (1 - 6 mm)
- Epoxy Easy to Clean Grout
- Chemical Resistant Epoxy Grout and Adhesive
- Silicone Enhanced Grouting Mortar (1-6 mm)
- Rapid Setting Flexible Grout
- Cement Based Grouting with High Temparature Resistance (1-6 mm)
- Silicone Enhanced Flexible Grouting Mortar (2-20 mm)
- Silicone Enhanced Flexible Grouting Mortar for Pools
- Silicone Enhanced Flexible Grouting Mortar 2700 (2-20 mm)
- Flexible Grouting Mortar (1-6 mm)
- Solvent-free Polyurethane Adhesive
- Epoxy Easy to Clean Grout
- Chemical Resistant Epoxy Grout and Adhesive
- Ready to Use Joint Repair Paste
- Grout Joint Painter
- Cement Remover
- Perfect adherence. Allows installation of tiles from top towards the bottom. Extended open time. Easily trowellable.
- 5 kg Polyethylene bags. 20 and 25 kg multi-ply paper bags.
- Perfect adherence. Allows installation of tiles from top towards the bottom. Extended open time. Easily trowellable.
- Floor and wall bonding of all types of ceramic tiles, mosaic and decorative bricks on cementitious renders, cementitious screeds and concrete. The substrates must be primed with KALEKİM SMOOTH SURFACE PRIMER before bonding of tiles on existing ceramic tiles. Exterior bonding and grouting of glass mosaics. Interior and exterior bonding of glass bricks.
- 25 kg multi-ply paper bags
- Perfect adherence. Allows installation of tiles from top towards the bottom. Extended open time. Easily trowellable.
- Floor and wall bonding of all types of ceramic tiles, mosaic and decorative bricks on cementitious renders, cementitious screeds and concrete. The substrates must be or primed with KALEKİM SMOOTH SURFACE PRIMER before bonding of tiles on existing ceramic tiles.
- 25 kg multi-ply paper bags
- User friendly with dust-free technology. Perfect adherence. Allows installation of tiles from top towards the bottom. Extended open time. Easily trowellable.
- initial: ≥ 0.5 N/mm²
- after heat exposure: ≥ 0.5 N/mm²
- after immersion in water: ≥ 0.5 N/mm²
- after freeze/thaw cycles: ≥ 0.5 N/mm²
- Interior and exterior floor and wall bonding of, all types and sizes of ceramic tiles, natural stone, marble, granite, porcelain ceramic, clinker, cotto on cementitious renders, cementitious screeds and concrete. Bonding of tiles on existing ceramic tile, granite. Bonding of tiles on painted walls and gypsum. Bonding of ceramic tiles in swimming pools, basins and any other wet places. Bonding of tiles on terraces and balconies. Bonding of tiles on places where sudden, temperature changes occurs like cold storage, depots and over floor heat installations. Bonding of tiles on places subject to heavy traffic, like shopping malls, hospitals, schools.
- 20 kg and 25 kg multi-ply paper bags
- Perfect adherence. Highly Deformable, resistant to temperature changes. Can be applied on vertical surfaces even for bonding of heavy tiles without sagging. Extended open time. Easily trowellable.
- initial: ≥ 1 N/mm²
- after heat exposure: ≥ 1 N/mm²
- after immersion in water: ≥ 1 N/mm²
- after freeze/thaw cycles: ≥ 1 N/mm²
- Strong adhesion with excellent slip resistance, allowing secure installation of heavy tiles on vertical surfaces.
- Smooth and easy to apply with a trowel.
- Extended pot life provides ample working time.
- Appearance: Grey or white powder
- Shelf Life: 12 months when stored in original, unopened packaging in a dry environment
- Application Temperature: +5°C to +35°C
- Mixing Ratio:
- Grey: 6.5–7.0 liters of water per 25 kg
- White: 7.0–7.5 liters of water per 25 kg
- Pot Life: Approximately 6 hours
- Grouting Schedule:
- Wall applications: after 8 hours
- Floor applications: after 24 hours
- Coverage: 3–5 kg/m²
- Slip (EN 1308): ≤ 0.5 mm
- Open Time (EN 1346): ≥ 0.5 N/mm² after 30 minutes
- Tensile Adhesion Strength (EN 1348):
- Initial (28 days): ≥ 1 N/mm²
- After heat exposure: ≥ 1 N/mm²
- After water immersion: ≥ 1 N/mm²
- After freeze–thaw cycles: ≥ 1 N/mm²
- Service Temperature Range (fully cured): −40°C to +80°C
- Release of Dangerous Substances: Refer to Safety Data Sheet (SDS)
- Reaction to Fire: Class A1
- Exterior bonding of large-format ceramic, stone, granite, porcelain, and marble tiles.
- Rapid tiling projects — grouting is possible within just 2–3 hours, enabling same-day completion for time-sensitive installations.
- High-traffic environments such as shopping malls, hospitals, and schools.
- Floor and wall bonding of large and thin tiles (3–5 mm), including products like Kalesinterflex.
- Interior and exterior installations across all types and sizes of ceramic tiles, natural stone, marble, granite, porcelain, clinker, and cotto — on cementitious renders, screeds, and concrete substrates.
- Exterior cladding of ceramic, granite, or porcelain tiles up to 40×40 cm at heights of up to 30 meters, and up to 60×60 cm at heights of up to 15 meters.
- Powder component: 25 kg multi-ply paper bags
- Liquid component: 7.5 lt drums
- Perfect adhesion with extra fast setting — within just 3 hours.
- Highly deformable and resistant to temperature fluctuations.
- Weatherproof — performs reliably in all climatic conditions.
- Vertical application — bonds heavy tiles to walls without sagging.
- Extended open time for greater workability on the job site.
- After 3 hours: ≥ 0.5 N/mm²
- Initial (after 28 days): ≥ 1 N/mm²
- After heat exposure: ≥ 1 N/mm²
- After water immersion: ≥ 1 N/mm²
- After freeze/thaw cycles: ≥ 1 N/mm²
- Large-format exterior bonding of ceramic, stone, granite, porcelain, and marble tiles.
- Fast-track installations — grouting is possible in just 2–3 hours, making it ideal for projects requiring same-day completion.
- Heavy-traffic areas including shopping malls, hospitals, schools, and commercial facilities.
- Floor and wall installations of large and thin-format tiles (3–5 mm thick), such as Kalesinterflex panels.
- Interior and exterior tiling across all tile types and sizes — ceramic, natural stone, marble, granite, porcelain, clinker, and cotto — over cementitious renders, screeds, and concrete substrates.
- Exterior façade cladding with ceramic, granite, or porcelain tiles up to 40×40 cm at heights of up to 30 meters, and up to 60×60 cm at heights of up to 15 meters.
- Powder component: 25 kg multi-ply paper bags
- Liquid component: 7.5 lt drums
- Delivers outstanding adhesion with extra fast setting — functional strength achieved within just 3 hours.
- Highly deformable (S2 class), accommodating substrate movement and thermal expansion with ease.
- Engineered to withstand all climatic conditions, including extreme temperature variations.
- Suitable for vertical surface applications — securely bonds heavy tiles without sagging or slippage.
- Extended open time provides greater flexibility and ease of use during installation.
- After 3 hours: ≥ 0.5 N/mm²
- Initial strength (28 days): ≥ 1 N/mm²
- After heat aging: ≥ 1 N/mm²
- After water immersion: ≥ 1 N/mm²
- After freeze/thaw cycles: ≥ 1 N/mm²
- Interior and exterior floor and wall bonding of all types and sizes of ceramic tiles, natural stone, and decorative bricks on cementitious renders, screeds, and concrete substrates.
- Rapid tiling projects in high-demand environments such as public buildings, cafés, supermarkets, and airports — where installations need to be completed and operational within a single day.
- Tile-over-tile bonding — ideal for renovation projects where new tiles are applied directly over existing ceramic surfaces.
- 25 kg multi-ply paper bags
- Rapid setting allows for faster project turnaround without compromising bond quality.
- Delivers excellent adhesion across a variety of substrates and tile types.
- Suitable for vertical surface applications — securely holds heavy tiles in place without sagging or slipping.
- Easy to trowel, ensuring smooth, consistent application and an efficient workflow on site.
- Initial strength: ≥ 1 N/mm²
- After heat aging: ≥ 1 N/mm²
- After water immersion: ≥ 1 N/mm²
- After freeze/thaw cycles: ≥ 1 N/mm²
- After 6 hours: ≥ 0.5 N/mm²
- Interior and exterior floor and wall bonding of all types and sizes of ceramic tiles, natural stone, marble, granite, porcelain, clinker, and cotto on cementitious renders, screeds, and concrete substrates.
- Wet environments — ideal for swimming pools, Turkish baths, water tanks, basins, and any other permanently or intermittently wet areas, including bonding of tiles and glass mosaics.
- Tile-over-tile and stone-over-stone installations — suitable for bonding ceramic tiles or granite onto existing granite, ceramic, or marble surfaces.
- Temperature-sensitive environments — performs reliably in locations subject to sudden thermal changes, such as cold storage facilities and underfloor heating systems.
- High-traffic commercial spaces including shopping malls, hospitals, and schools.
- 25 kg multi-ply paper bags
- Outstanding adhesion across a wide variety of substrates and tile formats.
- Highly deformable (S2 class), accommodating thermal movement and structural stress without compromising bond integrity.
- Temperature resistant — maintains performance through extreme heat and cold cycles.
- Waterproofing properties make it the go-to choice for wet and submerged applications.
- Extended open time provides greater flexibility during installation, especially on large-area projects.
- Bonds heavy tiles on vertical surfaces without sagging or slippage.
- Easy to trowel, ensuring smooth, efficient application on the job site.
- Initial strength (28 days): ≥ 1 N/mm²
- After heat aging: ≥ 1 N/mm²
- After water immersion: ≥ 1 N/mm²
- After freeze/thaw cycles: ≥ 1 N/mm²
- Interior and exterior floor installations for medium and large-format tiles, including ceramic, granite ceramic, porcelain, cotto, clinker, and marble — eliminating the need for back-buttering.
- Heated floor systems — bonds securely over underfloor heating installations.
- Heavy-traffic commercial areas such as shopping malls, hospitals, and schools, where durability and long-lasting performance are essential.
- Time-critical projects in public buildings, cafés, supermarkets, and airports that require same-day completion and readiness for use.
- 20 kg multi-ply paper bags
- Lower material consumption and reduced labor costs, delivering excellent value without sacrificing performance.
- Full back-of-tile coverage achieved without applying additional pressure — ensuring a strong, void-free bond every time.
- Fast-setting formula accelerates project timelines and minimizes downtime.
- Exceptional adhesion to a broad range of substrates and tile materials.
- Semi-fluid consistency that spreads smoothly and is effortless to trowel.
- Extended open time allows flexibility for precise positioning during large-scale installations.
- Highly flexible — absorbs substrate movement and structural shifts with ease.
- Temperature-change resistant — maintains bond integrity through thermal cycling.
- Interior and exterior floor and wall bonding of all types and sizes of ceramic tiles, natural stone, marble, granite, porcelain, clinker, and cotto on cementitious renders, screeds, and concrete substrates.
- Tile-over-tile installations — bonds new tiles directly onto existing ceramic, granite, or similar surfaces.
- Painted walls and gypsum surfaces — adheres reliably even on challenging substrates.
- Wet environments — ideal for swimming pools, basins, and other permanently or intermittently wet areas.
- Terraces and balconies — engineered to withstand outdoor exposure and weathering.
- Temperature-sensitive locations — performs in environments subject to sudden thermal changes, including cold storage facilities, oven walls, and underfloor heating systems.
- High-traffic commercial spaces such as shopping malls, hospitals, and schools.
- 15 kg multi-ply paper bags with ergonomic handles for easy carrying
- Approximately 40% less consumption compared to standard adhesives — a 15 kg bag delivers the same coverage as a conventional 25 kg product, reducing material and transportation costs.
- Highly flexible with rubber fillers — absorbs movement, vibration, and structural stress without compromising the bond.
- Nano-technological raw materials contribute to outstanding adhesion strength and long-term durability.
- Lightweight and easy to carry — the compact, handled packaging improves on-site handling and reduces physical strain.
- Highly deformable (S2 class) and resistant to temperature fluctuations across extreme conditions.
- Suitable for vertical surfaces — securely bonds heavy tiles without sagging or slippage.
- Extended open time allows greater flexibility for precise tile positioning on large-area projects.
- Easy to trowel — smooth, workable consistency ensures efficient and uniform application.
- Bonding ceramic and granite ceramic on concrete, metal, fibre-cement, wood, and plasterboard surfaces.
- Parquet flooring installations — provides a strong, flexible bond for wood flooring applications.
- Underfloor heating systems — adheres securely over heated floor installations.
- Thin tile bonding — suitable for fibre-mesh-reinforced thin tiles such as Kalesinterflex®.
- 7 kg pail (2 components)
- Solvent-free formulation — safer for both the installer and the environment.
- Excellent flexibility — accommodates substrate movement and thermal expansion without compromising bond strength.
- Perfect adhesion across diverse substrates including concrete, metal, wood, and plasterboard.
- Wet environments — perfectly suited for swimming pools, saunas, bathrooms, toilets, and other areas exposed to moisture.
- Outdoor installations — performs reliably on terraces and balconies, withstanding weather and temperature variations.
- Time-sensitive projects — ideal for government buildings, cafés, supermarkets, airports, and other spaces where rapid completion and same-day usability are essential.
- 20 kg multi-ply paper bags
- Rapid strength gain — begins developing functional strength after just 6 hours, thanks to its quick-setting formulation.
- High adhesion strength — ensures a durable, long-lasting bond across various substrates and tile types.
- Zero slippage on vertical surfaces — holds tiles firmly in place during wall applications without sliding or sagging.
- Easy to trowel — smooth, workable consistency allows for efficient, hassle-free application on site.
- Designed for laying and bonding building elements with high water absorption, including aerated concrete blocks, pumice blocks, and standard bricks.
- Available in 25 kg multi-ply paper bags for convenient handling and storage.
- Delivers excellent adhesion strength with smooth, effortless troweling — helping reduce both application time and labor costs on site.
- Ideal for bonding ceramic, granite, and ceramic tiles to concrete, metal, fiber-cement, wood, and plasterboard surfaces.
- Suitable for parquet flooring installation.
- Recommended for use over underfloor heating systems.
- Compatible with trim tile systems (kaleinterflex) reinforced with fiber mesh.
- Available in 7 kg pails (2 components).
- Solvent-free formulation.
- Excellent flexibility.
- Superior adhesion performance.
- Designed for the secure fixing and bonding of waterproofing tape systems.
- Supplied in 5 kg plastic pails containing 3 components:
- Component A: 4.00 kg
- Component B: 0.375 kg
- Component C: 0.625 kg
- Exceptional bonding strength with high resistance to heavy traffic.
- Easily trowellable for smooth, efficient application.
- Outstanding chemical and mechanical resistance.
- Suitable for grouting joints up to 10 mm in width.
- Resistant to freeze-thaw cycles.
- Convenient 90-minute pot life at 25°C for extended workability.
- Horizontal and vertical bonding of artistic, porcelain tiles, cotto, clinker, granite, and marble.
- Floor and wall ceramics in both interior and exterior settings where chemical resistance is essential.
- Bonding of metal profiles to concrete in industrial environments requiring high mechanical strength.
- Suitable for bonding concrete, stone, metal, wood, and PVC — both to themselves and to one another.
- Supplied in 5 kg plastic buckets containing 3 components:
- Component A: 2.500 kg
- Component B: 0.250 kg
- Component C: 2.250 kg
- Delivers excellent adhesion strength across a wide range of substrates.
- Highly resistant to heavy load traffic.
- Easily applied for uniform application.
- Non-slip performance on vertical surfaces.
- Provides outstanding mechanical strength.
- Resistant to short-term temperature fluctuations and freeze-thaw cycles.
- Convenient 50-minute pot life at 23°C for flexible working time.
- Grouting interior and exterior floor and wall installations across all types and sizes of ceramic tiles, granite, cotto, clinker, glass mosaics, marble, natural stone, and antiqued marble.
- Suitable for joint widths of 3–20 mm.
- Ideal for wet areas such as swimming pools and water tanks.
- Recommended for environments subject to sudden temperature changes and heavy traffic, including facades, terraces, under-floor heating systems, and warehouses.
- Available in 20 kg multi-ply paper bags.
- Approved for use in contact with water intended for human consumption.
- High flexibility with excellent compressive and flexural strength.
- Strong resistance to freeze-thaw cycles.
- Low water absorption for enhanced durability.
- Produces a refined, rustic finish.
- Outstanding abrasion resistance.
- Minimal shrinkage, preventing cracks and fissures.
- UV and weather resistant.
- Available in 12 distinct colours.
- Interior floor and wall grouting of ceramic tiles, marble, natural stone, and glass mosaics.
- Designed for joint widths of 1–6 mm.
- Produces a smooth, refined final surface.
- Good abrasion resistance for long-lasting durability.
- Low shrinkage, preventing the formation of cracks and fissures.
- Available in 18 distinct colours to complement any design.
- Grouting ceramic tile and glass mosaic of all common sizes and formats, on both floors and walls.
- The standard interior grade is ideal for horizontal and vertical indoor installations where a consistent, clean joint line matters.
- For vertical exterior façades, exposed elevations, and more movement-prone or flexible substrates, specify the rustic exterior grade to benefit from enhanced weathering behaviour and flexibility where it counts.
- 3 kg plastic pail.
- Opens straight from the pail — saves time and keeps batch-to-batch colour consistent.
- Flexible, water-repellent matrix helps protect joints in kitchens, bathrooms, and other wet-use zones.
- Suited to the 1–6 mm joint range typically specified for fine ceramic and mosaic work.
- Joint filling for 2–10 mm joints in porcelain, granite, natural stone, marble, and other high-performance cladding — including anti-slip porcelain where a robust, hygienic joint is required.
- Food production, textile mills, pharmaceutical facilities, hospitals, and anywhere daily cleaning and contamination control are critical.
- Thermal and saline swimming pools, wastewater treatment infrastructure, and other wet process areas that demand long-term chemical and mechanical durability.
- Industrial floors and walls, laboratory bench installations, and commercial kitchen work zones subject to impact, traffic, and frequent wash-down cycles.
- 5 kg plastic pail, three-part system:
- Component A: 3.85 kg
- Component B: 0.31 kg
- Component C: 0.84 kg
- Spreads and finishes cleanly, with straightforward wash-off during application.
- Outstanding chemical and mechanical performance for demanding service conditions.
- Covers the 2–10 mm joint-width range typical of large-format stone and technical tile.
- Low-porosity, stain-resistant surface supports hygiene-led specifications.
- Smooth, dense film resists abrasion and everyday soiling; formulated for long service life.
- Approximately 60 minutes working time at 23°C under standard site conditions.
- Bonding thermal insulation boards and compatible building elements that require durable adhesion.
- Supplied in 5 kg plastic pails as a 3-component set:
- Component A: 2.3 kg
- Component B: 0.3 kg
- Component C: 2.4 kg
- Easy to apply and easy to clean during and after installation.
- Excellent chemical and mechanical resistance in service.
- Suitable for joint widths from 2 to 12 mm.
- Low water absorption helps improve stain resistance and hygiene performance.
- Smooth final surface with strong resistance to cracking and abrasion.
- Approximate pot life of 60 minutes at 25°C.
- Cement-based grouting for joint widths of 1-6 mm in interior and exterior tile installations.
- 1 kg, 2 kg, and 5 kg polyethylene bags
- 20 kg multi-ply paper bags
- Lower tendency to trap dirt and easier day-to-day cleaning.
- Low water absorption with water-repellent performance.
- UV and atmospheric resistance for improved colour durability.
- Smooth final appearance with low shrinkage to help reduce crack formation.
- Very good abrasion resistance for long-term service life.
- Available in 32 colour options.
- Grouting ceramic tile, granite, cotto, clinker, glass mosaics, marble, and natural stone on interior and exterior surfaces.
- Suitable for 2-20 mm joints in projects exposed to heavy use, including shopping malls, hospitals, hotels, and public buildings.
- Ideal for wet and temperature-stressed areas such as swimming pools, water tanks, facades, terraces, underfloor heating systems, and warehouses.
- 5 kg plastic pails.
- Fast setting with early serviceability and early light foot traffic readiness.
- High flexibility with low water absorption for improved durability.
- Excellent resistance to freeze-thaw cycles, cracking, and abrasion.
- Available in 10 UV- and weather-resistant colours.
- Interior and exterior wall and floor joints in ceramic and natural stone installations.
- Pool surrounds and wet-service zones including pool ceramic, granite ceramic, glass mosaics, porcelain tile, and marble.
- Water reservoirs, baths, and sauna facilities.
- Industrial floors exposed to heavy traffic and frequent mechanical or chemical cleaning.
- Facades, terraces, and balconies subject to changing weather conditions.
- 20 kg multi-ply paper bags.
- Specially formulated to resist pool and cleaning chemicals.
- Withstands sustained service temperatures up to 250°C.
- UV-stable colour performance that helps prevent fading.
- Smooth final appearance with low shrinkage to minimize cracking risk.
- Easy application and very good abrasion resistance.
- Interior and exterior floor and wall grouting for ceramic tiles, granite, cotto, clinker, glass mosaics, marble, and natural stone.
- Designed for 2-20 mm joint widths in wet and high-use areas such as swimming pools, water tanks, bathrooms, showers, balconies, and kitchens.
- Suitable for facades, terraces, and underfloor heating installations where sudden temperature changes and heavy traffic are expected.
- 5 kg polyethylene bags
- 20 kg multi-ply paper bags
- Less prone to dirt accumulation and easy to clean.
- Low water absorption with water-repellent performance.
- Approved for contact with water intended for human consumption.
- Low shrinkage helps prevent cracks and fissures.
- Very good abrasion resistance with high compressive and flexural strength.
- Excellent freeze-thaw resistance and fast curing.
- Smooth final finish for an improved visual result.
- Floor and wall grouting in wet-service areas such as swimming pools, water tanks, bathrooms, balconies, Turkish baths, saunas, and thermal facilities.
- 20 kg multi-ply paper bags
- 5 kg polyethylene bags
- Resistant to pool treatment chemicals and approved for contact with water intended for human consumption.
- Strong compressive and flexural performance with reliable freeze-thaw resistance.
- Low water absorption and low shrinkage help reduce cracking risk.
- Smooth final appearance with very good abrasion resistance.
- Fast curing, UV and climate resistance, and availability in 7 colour options.
- Grouting ceramic tiles, granite, cotto, clinker, glass mosaics, marble, natural stone, and antiqued marble for 2-20 mm joints.
- Suitable for wet and high-use areas such as swimming pools, water tanks, bathrooms, showers, balconies, and kitchens.
- Ideal for facades, terraces, warehouses, and underfloor-heating systems where sudden temperature changes and heavy traffic occur.
- 20 kg multi-ply paper bags.
- User-friendly and dust-free during mixing and application.
- Low water absorption and water-repellent behaviour for improved durability and cleaner joints.
- Approved for use in contact with water intended for human consumption.
- Low shrinkage helps reduce crack and fissure formation.
- High abrasion resistance with strong compressive and flexural strength.
- Excellent resistance to freeze-thaw cycles.
- Smooth final surface with UV and atmospheric resistance.
- Interior and exterior floor and wall grouting for ceramic tile, granite, cotto, clinker, glass mosaics, marble, and natural stone.
- Suitable for 1-6 mm joints in wet and high-traffic areas such as swimming pools, water tanks, facades, terraces, underfloor heating installations, and warehouses.
- 1 kg and 5 kg polyethylene bags
- 20 kg multi-ply paper bags
- Approved for use in contact with water intended for human consumption.
- High flexibility with strong compressive and flexural performance.
- Good freeze-thaw resistance and low water absorption.
- Smooth final surface with low shrinkage to help prevent cracks.
- Fast curing, very good abrasion resistance, and UV/weather durability.
- Available in 32 colour options.
- Grouting ceramic tiles and glass mosaics in a wide range of interior wall and floor applications.
- The standard formulation provides dependable results for horizontal and vertical interior use.
- For vertical exterior applications, the rustic-grade variant is recommended for facades and flexible substrates.
- 3 kg plastic pail.
- Ready-to-use acrylic formula with flexible and water-repellent performance.
- Designed for neat and stable joint filling in the 1-6 mm range.
- Grouting anti-slip porcelain, granite, natural stone, marble, and similar surface materials in 2-10 mm joints.
- Food processing, textile, pharmaceutical, and healthcare facilities where hygiene and cleaning frequency are critical.
- Industrial zones requiring high chemical and mechanical durability, including laboratory benches and commercial kitchen work areas.
- Saline and thermal swimming pools, as well as wastewater treatment facilities.
- 5 kg plastic pail, 3-component set:
- Component A: 3.85 kg
- Component B: 0.31 kg
- Component C: 0.84 kg
- Easy application and clean finishability on site.
- Excellent chemical and mechanical resistance for long service life.
- Suitable for 2-10 mm joints with strong stain resistance and hygiene performance.
- Low water absorption with a smooth, easy-to-clean final surface.
- High crack and abrasion resistance, with approximately 60 minutes pot life at 23°C.
- Bonding thermal insulation boards and compatible substrates that require strong, durable adhesion.
- 5 kg plastic pail, 3-component set:
- Component A: 2.3 kg
- Component B: 0.3 kg
- Component C: 2.4 kg
- Easy to apply and clean, with smooth finishing behavior.
- Excellent chemical and mechanical resistance for demanding service conditions.
- Suitable for 2-12 mm joints, with strong stain resistance and low water absorption.
- High resistance to cracking and abrasion for long-term durability.
- Approximate pot life of 60 minutes at 25°C.
- Filling and repairing cracked or discoloured grout in porcelain, ceramic, and glass mosaic installations on walls and floors.
- Typical locations include bathrooms, balconies, and kitchens.
- 350 g plastic cartridge; 12 pieces per carton.
- Highly flexible formulation that resists re-cracking under normal movement.
- Ready to use straight from the tube; straightforward application.
- Water-resistant performance for wet-area compatibility.
- Renewing tired or stained grout between tile, porcelain, ceramic, granite, and similar surfaces in bathrooms, toilets, and kitchens.
- Evening out uneven grout colour and masking localised staining from everyday use.
- 160 g plastic tube; 12 tubes per carton.
- Suitable for areas that are washed often; wipes clean readily with good stain resistance.
- Strong hiding power for a visibly refreshed joint line.
- High water vapour permeability.
- Simple, straightforward application.
- Cleaning cement-based adhesive and grout haze from ceramic, porcelain, glazed tile, clinker, cotto, rustic tile, hearth stone, granite, and many natural stone finishes — where the finish is confirmed acid-resistant.
- Removing general construction and mortar residues from compatible cladding after installation or renovation.
- 1 litre plastic bottle; 16 bottles per carton.
- Dilute with water according to soiling: typically 1:1 to 1:5 (product : water) for light to moderate residues.
- Apply with a mop or brush to the affected area.
- Allow approximately 3–5 minutes contact time; scrub with a brush or abrasive sponge until stains and crusting are removed.
- Pick up the liquid with a sponge, squeegee, or wet vacuum, then rinse thoroughly and repeatedly with clean water.
- For stubborn deposits, use undiluted product and extend contact time as needed, without letting it dry on the surface.
- Before use, confirm that all surfaces to be cleaned are acid-resistant; mask or protect adjacent materials that could be damaged by acid splash.
- Not intended for removing oil or grease; avoid prolonged contact with grout joints.
- Wear rubber gloves, suitable footwear, and eye protection; consult the Safety Data Sheet (SDS) for full handling and disposal guidance.
Epoxy Based Grouts
Cement based tile adhesives deliver strong, lasting bond performance for ceramic, porcelain, and natural stone applications, offering reliable workability, reduced slip, and secure adhesion on both interior and exterior surfaces.
Surface Cleaning & Maintenance Products
Tile Adhesive
Definition
It is a cement-based ceramic adhesive mortar with reduced slip properties and a long working time.
Usage Areas
Package
Features
Professional Knowledge
Technical Properties (at 23°C and 50% RH)
General Data
| Appearance | Grey powder |
|---|---|
| Shelf Life | 12 months when stored in the original sealed packing in dry place |
Application Data
| Application Temperature Range | (+5°C) – (+35°C) |
|---|---|
| Mixing Ratio | 6.5–8 lt water / 25 kg powder | 1.3–1.6 lt water / 5 kg powder |
| Pot Life | Approx. 6 hours |
| Slip (EN 1308) | ≤ 0.5 mm |
| Open Time (EN 1346) | After 30 minutes ≥ 0.5 N/mm² |
| Grouting | 8 hours on wall; 24 hours after on floor |
| Consumption | 3–5 kg/m² |
Performance Data
| Tensile Adhesion Strength (EN 1348) |
– initial: ≥ 0.5 N/mm² – after heat exposure: ≥ 0.5 N/mm² – after immersion in water: ≥ 0.5 N/mm² – after freeze/thaw cycles: ≥ 0.5 N/mm² |
|---|---|
| Service Temperature Range (after final cure) | (-40°C)–(+80°C) |
| Release of Dangerous Substances (EN 12004) | See SDS |
| Reaction to Fire | A1 |
Ceramic Adhesive Mortar
Definition
Cementitious ceramic tile adhesive with extended open time and reduced slip.
Usage Areas
Package
Features
Professional Knowledge
Technical Properties (at 23°C and 50% RH)
General Data
| Appearance | White powder |
|---|---|
| Shelf Life | 12 months when stored in the original sealed packing in dry place |
Application Data
| Mixing Ratio | 7–7.5 liters water / 25 kg powder |
|---|---|
| Pot Life | Approx. 6 hours |
| Application Temperature Range | (+5°C) – (+35°C) |
| Grouting | 8 hours on wall; 24 hours after on floor |
| Consumption | 3–5 kg/m² |
Performance Data
| Slip (EN 1308) | ≤ 0.5 mm |
|---|---|
| Open Time (EN 1346) | After 30 minutes ≥ 0.5 N/mm² |
| Tensile Adhesion Strength (EN 1348) |
– initial: ≥ 0.5 N/mm² – after heat exposure: ≥ 0.5 N/mm² – after immersion in water: ≥ 0.5 N/mm² – after freeze/thaw cycles: ≥ 0.5 N/mm² |
| Service Temperature Range (after final cure) | (-40°C)–(+80°C) |
| Release of Dangerous Substances (EN 12004) | See SDS |
| Reaction to Fire | A1 |
Dust-Free Ceramic Tile Adhesive
Definition
Dust-free cementitious ceramic tile adhesive with extended open time and reduced slip.
Usage Areas
Package
Features
Professional Knowledge
Technical Properties (at 23°C and 50% RH)
General Data
| Appearance | Grey powder |
|---|---|
| Shelf Life | 12 months when stored in the original sealed packing in dry place |
Application Data
| Application Temperature Range | (+5°C)–(+35°C) |
|---|---|
| Mixing Ratio | 6.75–7.25 lt water / 25 kg powder |
| Pot Life | 6 hours |
| Grouting | 8 hours on wall; 24 hours after on floor |
| Consumption | 3–5 kg/m² |
Performance Data
| Slip (EN 1308) | ≤ 0.5 mm |
|---|---|
| Open Time (EN 1346) | After 30 minutes ≥ 0.5 N/mm² |
| Tensile Adhesion Strength (EN 1348) |
|
| Service Temperature Range (after final cure) | (-40°C)–(+80°C) |
| Release of Dangerous Substances (EN 12004) | See SDS |
| Reaction to Fire | A1 |
Deformable Tile Adhesive
Definition
High performance cementitious flexible adhesive with extended open time and reduced slip for ceramic tiles and stones. There is a version with Wintertech technology which can be used safely between (-10°C) – (+35°C) for continued application in winter conditions.
Usage Areas
Package
Features
Professional Knowledge
Technical Properties (at 23°C and 50% RH)
General Data
| Appearance | Grey or White powder |
|---|---|
| Shelf Life | 12 months when stored in the original sealed packing in dry place |
Application Data
| Application Temperature Range |
(+5°C)–(+35°C) (-10°C)–(+23°C) with Wintertech Technology |
|---|---|
| Mixing Ratio |
6.5–7.25 liters water / 25 kg grey powder 6.75–7.25 liters water / 25 kg white powder |
| Pot Life | 6 hours |
| Grouting | 8 hours on wall; 24 hours after on floor |
| Consumption | 3–5 kg/m² |
Performance Data
| Slip (EN 1308) | ≤ 0.5 mm |
|---|---|
| Open Time (EN 1346) | After 30 minutes ≥ 0.5 N/mm² |
| Tensile Adhesion Strength (EN 1348) |
|
| Deformability (EN 12002) | ≥ 2.5 mm – S1 Deformable |
| Service Temperature Range (after final cure) | (-40°C)–(+80°C) |
| Release of Dangerous Substances (EN 12004) | See SDS |
| Reaction to Fire | A2 |
Granite Tile Adhesive
Product Overview
A high-performance, cementitious tile adhesive designed for extended open time and reduced slip, offering reliable bonding even in demanding applications.
Application Areas
Ideal for interior and exterior floor and wall installations. Suitable for bonding all types and sizes of ceramic tiles, granite, porcelain, cotto, and clinker onto cementitious renders, screeds, and concrete. Also effective for tiling over existing ceramic or marble surfaces. Well-suited for high-traffic environments such as shopping centers, hospitals, and schools.
Packaging
Supplied in 25 kg multi-ply paper bags.
Key Features
Technical Specifications
(Determined at 23°C and 50% relative humidity)
General Characteristics
Application Guidelines
Performance Data
Highly Deformable Tile Adhesive
Product Overview
Ultratech is an extra fast-setting, S2-class, two-component, cement-based adhesive mortar. Engineered for high performance and exceptional flexibility, it offers reduced slip properties and an extended working time — making it the ideal solution for demanding tiling applications.
Application Areas
Packaging
Key Features
Technical Properties
(Tested at 23°C and 50% RH)
General Data
| Appearance | 1st component: Grey powder / 2nd component: White liquid |
|---|---|
| Shelf Life | 12 months (in original sealed packaging, stored in a dry place) |
Application Data
| Application Temperature Range | +5°C to +35°C |
|---|---|
| Mixing Ratio | 7.5 liters liquid per 25 kg powder |
| Pot Life | 1 hour |
| Grouting Time | 2–3 hours |
| Consumption | 4.5–6.5 kg/m² (combined method) |
Performance Data
| Slip (EN 1308) | ≤ 0.5 mm |
|---|---|
| Open Time (EN 1346) | After 30 min ≥ 0.5 N/mm² |
| Tensile Adhesion Strength (EN 1348) |
|
| Deformability (EN 12002) | ≥ 5 mm — S2 |
| Service Temperature Range (after final cure) | (-40°C)–(+80°C) |
| Release of Dangerous Substances (EN 12004) | See SDS |
| Reaction to Fire | B s1d0 |
Two Component Highly Deformable Tile Adhesive
Product Overview
A high-performance, extra fast-setting, two-component, cement-based adhesive mortar classified as S2 for high deformability. Designed to deliver superior bonding strength with minimal slip and an extended working time, it meets the demands of the most challenging tile installation projects.
Recommended Applications
Available Packaging
Product Advantages
Technical Specifications
All values measured at 23°C and 50% relative humidity.
General Information
| Appearance | Component 1: Grey powder / Component 2: White liquid |
|---|---|
| Shelf Life | 12 months when stored in original sealed packaging in a cool, dry place |
Application Guidelines
| Application Temperature | +5°C to +35°C |
|---|---|
| Mixing Ratio | 7.5 liters liquid per 25 kg powder |
| Pot Life | 1 hour |
| Time to Grouting | 2–3 hours |
| Approximate Consumption | 4.5–6.5 kg/m² (using the combined method) |
Performance Characteristics
| Slip Resistance (EN 1308) | ≤ 0.5 mm |
|---|---|
| Open Time (EN 1346) | ≥ 0.5 N/mm² after 30 minutes |
| Tensile Adhesion Strength (EN 1348) |
|
| Deformability (EN 12002) | ≥ 5 mm (S2 classification) |
| Service Temperature Range (fully cured) | -40°C to +80°C |
| Dangerous Substances (EN 12004) | Refer to Safety Data Sheet (SDS) |
| Reaction to Fire | B s1d0 |
Fast Setting Tile Adhesive
Product Overview
A high-performance, rapid-setting cementitious adhesive engineered for ceramic tiles and natural stone. Formulated with reduced slip properties, it ensures secure, reliable bonding across a wide range of interior and exterior applications.
Recommended Applications
Available Packaging
Product Advantages
Technical Specifications
All values measured at 23°C and 50% relative humidity.
General Information
| Appearance | Grey powder |
|---|---|
| Shelf Life | 12 months when stored in original sealed packaging in a cool, dry place |
Application Guidelines
| Application Temperature | +5°C to +35°C |
|---|---|
| Mixing Ratio | 6–7 liters water per 25 kg powder |
| Pot Life | 45 minutes |
| Time to Grouting | 3–4 hours |
| Approximate Consumption | 3–5 kg/m² |
Performance Characteristics
| Slip Resistance (EN 1308) | ≤ 0.5 mm |
|---|---|
| Open Time (EN 1346) | ≥ 0.5 N/mm² after 10 minutes |
| Tensile Adhesion Strength (EN 1348) |
|
| Service Temperature Range (fully cured) | -40°C to +80°C |
| Dangerous Substances (EN 12004) | Refer to Safety Data Sheet (SDS) |
| Reaction to Fire | A1 |
Tile Adhesive for Waterproofing Systems
Product Overview
A high-performance, flexible, and water-resistant cementitious adhesive designed for ceramic tiles and natural stone. Engineered with an extended open time and reduced slip properties, it delivers reliable bonding in both standard and demanding environments — including wet areas, heated floors, and high-traffic spaces.
Recommended Applications
Available Packaging
Product Advantages
Technical Specifications
All values measured at 23°C and 50% relative humidity.
General Information
| Appearance | Gray or White powder |
|---|---|
| Shelf Life | 12 months when stored in original sealed packaging in a cool, dry place |
Application Guidelines
| Application Temperature | +5°C to +35°C |
|---|---|
| Mixing Ratio (Gray) | 5.75–6.25 liters water per 25 kg powder |
| Mixing Ratio (White) | 6.25–6.75 liters water per 25 kg powder |
| Pot Life | 6 hours |
| Time to Grouting | 8 hours (wall); 24 hours (floor) |
| Approximate Consumption | 3–5 kg/m² |
Performance Characteristics
| Slip Resistance (EN 1308) | ≤ 0.5 mm |
|---|---|
| Open Time (EN 1346) | ≥ 0.5 N/mm² after 30 minutes |
| Tensile Adhesion Strength (EN 1348) |
|
| Deformability (EN 12002) | ≥ 5 mm (S2 — Highly Deformable) |
| Service Temperature Range (fully cured) | -40°C to +80°C |
| Dangerous Substances (EN 12004) | Refer to Safety Data Sheet (SDS) |
| Reaction to Fire | A2 |
Fast Setting Pourable Tile Adhesive
Product Overview
A high-performance, full-contact, fast-setting cementitious flexible adhesive designed for ceramic tiles and natural stone. With its extended open time and superior bonding capability, it achieves complete tile coverage without back-buttering — streamlining installation while ensuring professional-grade results.
Recommended Applications
Available Packaging
Product Advantages
Technical Specifications
All values measured at 23°C and 50% relative humidity.
General Information
| Appearance | Gray powder |
|---|---|
| Shelf Life | 12 months in original sealed packaging, stored in a dry location |
Application Guidelines
| Application Temperature | +5°C to +35°C |
|---|---|
| Mixing Ratio | 4.6–5 liters water per 20 kg powder |
| Pot Life | 1 hour |
| Time to Grouting | 3–4 hours |
| Approximate Consumption | 3–5 kg/m² |
Performance Characteristics
| Open Time (EN 1346) | ≥ 0.5 N/mm² after 30 minutes |
|---|---|
| Tensile Adhesion Strength (EN 1348) | |
| — Initial strength | ≥ 1 N/mm² |
| — After heat exposure | ≥ 1 N/mm² |
| — After water immersion | ≥ 1 N/mm² |
| — After freeze/thaw cycles | ≥ 1 N/mm² |
| — After 6 hours | ≥ 0.5 N/mm² |
| Service Temperature Range (fully cured) | -40°C to +80°C |
| Release of Dangerous Substances (EN 12004) | Refer to Safety Data Sheet (SDS) |
| Reaction to Fire | A1 |
Lightweight Deformable Tile Adhesive
Product Overview
A high-performance, lightweight, flexible cementitious tile adhesive enhanced with rubber fillers and nano-technological additives. Engineered with an extended open time and reduced slip properties, it delivers exceptional bonding strength at significantly lower consumption — making every installation faster, lighter, and more cost-effective.
Recommended Applications
Available Packaging
Product Advantages
Technical Specifications
All values measured at 23°C and 50% relative humidity.
General Information
| Appearance | Grey powder |
|---|---|
| Shelf Life | 12 months in original sealed packaging, stored in a dry location |
Application Guidelines
| Application Temperature | +5°C to +35°C |
|---|---|
| Mixing Ratio | 6–6.5 liters water per 15 kg powder |
| Pot Life | 6 hours |
| Time to Grouting | 8 hours (wall); 24 hours (floor) |
| Approximate Consumption | 1.5–2.5 kg/m² |
Performance Characteristics
| Slip Resistance (EN 1308) | ≤ 0.5 mm |
|---|---|
| Open Time (EN 1346) | ≥ 0.5 N/mm² after 30 minutes |
| Tensile Adhesion Strength (EN 1348) | |
| — Initial strength | ≥ 1 N/mm² |
| — After heat exposure | ≥ 1 N/mm² |
| — After water immersion | ≥ 1 N/mm² |
| — After freeze/thaw cycles | ≥ 1 N/mm² |
| Deformability (EN 12002) | ≥ 5 mm (S2 — Highly Deformable) |
| Service Temperature Range (fully cured) | -40°C to +80°C |
| Release of Dangerous Substances (EN 12004) | Refer to Safety Data Sheet (SDS) |
| Reaction to Fire | B s1d0 |
Solvent-free Polyurethane Adhesive
Product Overview
A two-component, solvent-free, polyurethane-based multi-purpose adhesive. Designed for versatile bonding across a wide range of substrates, it combines excellent flexibility with outstanding adhesion — making it ideal for both conventional and specialty tiling applications.
Recommended Applications
Available Packaging
Product Advantages
Technical Specifications
All values measured at 23°C and 50% relative humidity.
General Information
| Color | Component A: Light yellow / Component B: Dark brown |
|---|---|
| Shelf Life | 12 months in original sealed packaging, stored in a dry location |
Application Guidelines
| Mixing Ratio | Component A: 6.25 kg / Component B: 0.75 kg |
|---|---|
| Pot Life | 35–50 minutes |
| Setting Time | 80% hardening in 24 hours; 100% hardening in 1 week |
| Slip Resistance (EN 1308) | ≤ 0.5 mm |
| Consumption (tiling) | ~1.5 kg/m² (using a 4×4×4 mm notched trowel) |
| Consumption (waterproofing) | ~0.75 kg/m² (at 1 mm thickness) |
Performance Characteristics
| Open Time Tensile Adhesion Strength | ≥ 0.5 N/mm² after 30 minutes |
|---|---|
| Shear Adhesion Strength (TS EN 12003) | |
| — Initial strength | ≥ 2 N/mm² |
| — After water immersion | ≥ 2 N/mm² |
| — After thermal shock | ≥ 2 N/mm² |
| Flexibility | High |
| Service Temperature Range | -30°C to +80°C |
| Release of Dangerous Substances (EN 12004) | Refer to Safety Data Sheet (SDS) |
| Reaction to Fire | Cs2d1 |
Quick-Setting Flexible Adhesive Mortar
Product Overview
A quick-setting, high-performance, cement-based adhesive mortar engineered with reduced slippage properties. Designed to deliver rapid strength development and reliable bonding, it's the ideal choice for installations that demand both speed and durability.
Recommended Applications
Available Packaging
Product Advantages
Aerated Concrete Adhesive
Product Overview
A cement-based masonry mortar specially formulated for use with aerated concrete and similar porous building materials.
Applications
Packaging
Key Features
Solvent-free Polyurethane Adhesive
Product Description
A two-component, solvent-free polyurethane-based multi-purpose adhesive designed for demanding bonding applications.
Areas of Application
Packaging
Key Features
Technical Specifications
(Tested at 23°C and 50% RH)
General Information
| Property | Details |
|---|---|
| Colour | Component A: Light yellow - Component B: Dark brown |
| Shelf Life | 12 months when stored in original sealed packaging in dry environment |
Application Guidelines
| Parameter | Value |
|---|---|
| Mixing Ratio | Component A: 6.25 kg - Component B: 0.75 kg |
| Pot Life | 35-50 minutes |
| Setting Time | 80% hardening in 24 hours, full cure within 7 days |
| Slip (EN 1308) | ≤ 0.5 mm |
| Consumption | ~1.5 kg/m² (4x4x4 mm notched trowel), ~0.75 kg/m² (1 mm thickness for waterproofing) |
Performance Characteristics
| Property | Value |
|---|---|
| Open Time Tensile Adhesion Strength | ≥ 0.5 N/mm² after 30 minutes |
| Shear Adhesion Strength (TS EN 12003) | |
| — Initial strength | ≥ 2 N/mm² |
| — After water immersion | ≥ 2 N/mm² |
| — After thermal shock | ≥ 2 N/mm² |
| Flexibility | High |
| Service Temperature Range | -30°C to +80°C |
| Release of Dangerous Substances (EN 12004) | Refer to Safety Data Sheet (SDS) |
| Reaction to Fire | Cs2d1 |
Epoxy Adhesive R2T
Product Description
A three-component, solvent-free, epoxy resin-based adhesive engineered for chemical-resistant waterproofing tape applications.
Areas of Application
Packaging
Key Features
Technical Specifications
(Tested at 23°C and 50% RH)
General Information
| Property | Details |
|---|---|
| Appearance | Component A: White - light gray tone, Component B: Yellow-green transparent liquid, Component C: White powder |
| Components A/B/C | Epoxy resin - hardener - filler |
| Shelf Life | 12 months when stored in original sealed packaging in a cool, dry place |
Application Guidelines
| Parameter | Value |
|---|---|
| Application Temperature Range | +10°C to +30°C |
| Pot Life | 90 minutes at 25°C |
| Density | 1.10 g/cm³ |
| Solid Mixing Ratio | A+2B, mixed properly in original packaging |
| Water for Mix (max. one package) | N/A |
| Open to Foot Traffic | 24 hours |
| Consumption (as adhesive) | ~4-5 kg/m² |
| Consumption for waterproofing tape / Kalekim T-file and Tape bonding | ~1-1.5 kg/m² |
Performance Characteristics
| Property | Value |
|---|---|
| Shear Adhesion Strength (EN 12003) | |
| — Initial | ≥ 5 N/mm² |
| — After water immersion | ≥ 5 N/mm² |
| — After thermal shock | ≥ 5 N/mm² |
| Open Time Strength (EN 1346) | ≥ 0.5 N/mm² after 30 minutes |
| Flexural Strength (EN 12808-3) | > 30 N/mm² |
| Compressive Strength (EN 12808-3) | > 45 N/mm² |
| Service Temperature Range (after full cure) | -20°C to +80°C |
| Release of Dangerous Substances (EN 12004) | Refer to Safety Data Sheet (SDS) |
| Reaction to Fire | Ffl-s1 |
Acrylic Adhesive
Product Description
A three-component, solvent-free, chemical-resistant, thixotropic adhesive based on epoxy resin — engineered for high-performance bonding in demanding environments.
Areas of Application
Packaging
Key Features
Technical Specifications
(Tested at 23°C and 50% RH)
General Information
| Property | Details |
|---|---|
| Appearance | Component A: White paste; Component B: Green transparent liquid; Component C: Yellow powder |
| Shelf Life | 12 months when stored in original sealed packaging in a dry place |
Application Guidelines
| Parameter | Value |
|---|---|
| Application Temperature Range | +10°C to +27°C |
| Pot Life | 50 minutes at 23°C |
| Density | 2.00 kg/m³ |
| Grout Filling Period | 12–48 hours (depending on ambient temperature) |
| Ready for Use (Max. Chemical Resistance) | 7 days |
| Open to Foot Traffic | 24 hours |
| Consumption | 3–4 kg/m² |
Performance Characteristics
| Property | Value |
|---|---|
| Shear Adhesion Strength (EN 12003) | |
| — Initial | ≥ 15 N/mm² |
| — After water immersion | ≥ 15 N/mm² |
| — After thermal shock | ≥ 10 N/mm² |
| Open Time Strength (EN 1346) | ≥ 0.5 N/mm² after 30 minutes |
| Service Temperature Range (after full cure) | -20°C to +80°C |
| Release of Dangerous Substances (EN 12004) | Refer to Safety Data Sheet (SDS) |
| Reaction to Fire | Bfl-S1 |
Flexible Grouting Mortar (3-20 mm)
Product Description
A high-performance, cementitious flexible grout designed for joints ranging from 3 to 20 mm. Engineered for superior abrasion resistance and reduced water absorption, this grout delivers lasting durability in both standard and demanding environments.
Areas of Application
Packaging
Key Features
Technical Specifications
(Tested at 23°C and 50% RH)
General Information
| Property | Details |
|---|---|
| Appearance | White and coloured powder |
| Shelf Life | 12 months when stored in original sealed packaging in a dry place |
Application Guidelines
| Parameter | Value |
|---|---|
| Application Temperature Range | +5°C to +35°C |
| Mixing Ratio | 4–4.4 litres of water per 20 kg powder |
| Pot Life | 1 hour |
| Open to Light Traffic | 1 day |
| Consumption | Refer to consumption table based on joint width and tile dimensions |
Performance Characteristics
| Property | Value |
|---|---|
| Flexural Strength – 28 days (EN 12808-3) | ≥ 2.5 N/mm² |
| Compressive Strength – 28 days (EN 12808-3) | ≥ 15 N/mm² |
| Flexural Strength – After freeze/thaw cycles (EN 12808-3) | ≥ 2.5 N/mm² |
| Compressive Strength – After freeze/thaw cycles (EN 12808-3) | ≥ 15 N/mm² |
| Abrasion Resistance (EN 12808-2) | ≤ 1000 mm³ |
| Shrinkage (EN 12808-4) | ≤ 3 mm/m |
| Water Absorption (EN 12808-5) | ≤ 2 g after 30 min / ≤ 5 g after 4 hours |
| Service Temperature Range (after full cure) | -30°C to +80°C |
Grouting Mortar (1-6 mm)
Product Description
A cement-based grout specifically formulated for narrow joints ranging from 1 to 6 mm, delivering a smooth, durable finish for interior tile installations.
Areas of Application
Packaging
Available in multiple convenient sizes:
| Size | Packaging | Carton Configuration |
|---|---|---|
| 1 kg | Polyethylene bag | 20 pieces per carton |
| 2 kg | Polyethylene bag | 10 pieces per carton |
| 5 kg | Polyethylene bag | 5 pieces per carton |
| 20 kg | Multi-ply paper bag | — |
Key Features
Technical Specifications
(Tested at 23°C and 50% RH)
General Information
| Property | Details |
|---|---|
| Appearance | White and coloured powder |
| Shelf Life | 12 months when stored in original sealed packaging in a dry place |
Application Guidelines
| Parameter | Value |
|---|---|
| Mixing Ratio | 6.0–6.4 lt water per 20 kg powder; 1.50–1.60 lt water per 5 kg powder |
| Application Temperature Range | +5°C to +35°C |
| Pot Life | 1 hour |
| Open to Light Traffic | 24 hours |
| Consumption | Refer to consumption table based on joint width and tile dimensions |
Performance Characteristics
| Property | Value |
|---|---|
| Flexural Strength (EN 12808-3) | ≥ 2.5 N/mm² |
| Compressive Strength (EN 12808-3) | ≥ 15 N/mm² |
| Flexural Strength – After freeze/thaw cycles (EN 12808-3) | ≥ 2.5 N/mm² |
| Compressive Strength – After freeze/thaw cycles (EN 12808-3) | ≥ 15 N/mm² |
| Abrasion Resistance (EN 12808-2) | ≤ 1000 mm³ |
| Shrinkage (EN 12808-4) | ≤ 3 mm/m |
| Water Absorption (EN 12808-5) | ≤ 5 g after 30 min / ≤ 10 g after 4 hours |
| Service Temperature Range (after full cure) | -30°C to +80°C |
Ready to Use Flexible Grouting Mortar (1 - 6 mm)
Product Overview
A ready-mixed, acrylic-based flexible grout supplied as a smooth paste. It repels water, stays workable on the wall, and is formulated for dependable performance in 1–6 mm joints — no on-site powder mixing required.
Recommended Applications
Packaging
Key Benefits
Technical Specifications
Reference conditions: 23°C and 50% relative humidity.
General Characteristics
| Property | Details |
|---|---|
| Appearance | Paste in white, beige, and grey colour options |
| Density | 1.7 ± 0.1 kg/dm³ |
| Dry Solids Content | ≥ 85% |
| pH | 8.00 ± 0.5 |
| Shelf Life | 12 months in original sealed packaging, stored dry |
Application Guidelines
| Parameter | Value |
|---|---|
| Application Temperature Range | +10°C to +35°C |
| Light Traffic | > 48 hours |
| Consumption | Refer to the epoxy and acrylic consumption table for the project — quantities depend on joint width and tile dimensions |
Performance
| Property | Value |
|---|---|
| Resistance to Ageing | Good |
| Flexibility | High |
| Hardness (Shore D) | ∼ 50 |
| Service Temperature Range (after final cure) | -15°C to +70°C |
Epoxy Easy to Clean Grout
Product Overview
A three-component, solvent-free epoxy-resin grout engineered for aggressive environments. It combines strong chemical resistance with a dense, smooth finish that stays easier to clean and maintain than conventional cementitious grouts.
Recommended Applications
Packaging
Key Benefits
Technical Specifications
Reference laboratory conditions: 23°C and 50% relative humidity.
General Characteristics
| Property | Details |
|---|---|
| Appearance — Component A | White, grey, or beige viscous liquid |
| Appearance — Component B | Yellow-green transparent liquid |
| Appearance — Component C | Off-white powder |
| Composition (A / B / C) | Epoxy resin / Hardener / Filler |
| Shelf Life | 12 months in original sealed packaging, stored cool and dry |
Application Guidelines
| Parameter | Value |
|---|---|
| Application Temperature Range | +10°C to +27°C |
| Pot Life | 60 minutes at 25°C |
| Full Chemical Resistance (cured system) | 7 days |
| Foot Traffic | 24 hours |
| Consumption | As a grout: refer to the epoxy grout consumption table for the project |
Performance
| Property | Value |
|---|---|
| Flexural Strength (EN 12808-3) | ≥ 30 N/mm² |
| Compressive Strength (EN 12808-3) | ≥ 45 N/mm² |
| Abrasion Resistance (EN 12808-2) | ≤ 250 mm³ |
| Shrinkage (EN 12808-4) | ≤ 1.5 mm/m |
| Water Absorption after 240 min (EN 12808-5) | ≤ 0.1 g |
| Service Temperature Range (after final cure) | -20°C to +80°C |
| Release of Dangerous Substances | See Safety Data Sheet (SDS) |
Chemical Resistant Epoxy Grout and Adhesive
Product Overview
A three-component, solvent-free epoxy resin system developed as both a chemical-resistant grout and high-strength adhesive. It delivers a dense, easy-to-clean finish for demanding industrial and hygiene-critical areas.
Recommended Applications
Packaging
Key Benefits
Technical Specifications
(Tested at 23°C and 50% RH)
General Data
| Property | Details |
|---|---|
| Appearance - Component A | White, grey, beige viscous liquid |
| Appearance - Component B | Yellow-green transparent liquid |
| Appearance - Component C | Off-white powder |
| Shelf Life | 12 months when stored in original sealed packing in a cool, dry place |
| Components (A/B/C) | Epoxy resin / Hardener / Filler |
Application Data
| Parameter | Value |
|---|---|
| Application Temperature Range | +10°C to +27°C |
| Pot Life | 60 minutes at 25°C |
| Ready for Use (Max. Chemical Resistance) | 7 hours |
| Set to Foot Traffic | 24 hours |
| Consumption | As a grout, see epoxy grout consumption table |
Performance Data
| Property | Value |
|---|---|
| Shear Adhesion Strength (EN 12003) - Initial | ≥ 15 N/mm² |
| Shear Adhesion Strength (EN 12003) - After immersion in water | ≥ 15 N/mm² |
| Shear Adhesion Strength (EN 12003) - After thermal shock | ≥ 10 N/mm² |
| Flexural Strength (EN 12808-3) | ≥ 30 N/mm² |
| Compressive Strength (EN 12808-3) | ≥ 45 N/mm² |
| Abrasion Resistance (EN 12808-2) | ≤ 250 N/mm³ |
| Shrinkage (EN 12808-4) | ≤ 1.5 mm/m |
| Water Absorption (after 240 min) (EN 12808-5) | ≤ 0.10 g |
| Service Temperature Range (after final cure) | -20°C to +80°C |
| Release of Dangerous Substances | See SDS |
| Reaction to Fire | Bs1d0 |
Chemical Resistant Epoxy Grout and Adhesive (1-6 mm)
Product Overview
A fine-joint grout developed for 1-6 mm joints, offering a smooth and compact finish with low water absorption. Its water-repellent structure helps keep surfaces cleaner, while strong UV and weather resistance supports long-term colour stability.
Recommended Applications
Packaging
Key Benefits
Technical Specifications
(at 23°C and 50% RH)
General Data
| Property | Details |
|---|---|
| Appearance | White and coloured powder |
| Shelf Life | 12 months when stored in original sealed packaging in a dry place |
Application Data
| Parameter | Value |
|---|---|
| Application Temperature Range | +5°C to +35°C |
| Mixing Ratio | 6.0-6.4 lt water / 20 kg powder, 1.50-1.60 lt water / 5 kg powder |
| Pot Life | 1 hour |
| Set to Light Traffic | 1 day |
| Consumption | See consumption table depending on joint width and tile dimensions |
Performance Data
| Property | Value |
|---|---|
| Flexural Strength (EN 12808-3) | ≥ 2.5 N/mm² |
| Compressive Strength (EN 12808-3) | ≥ 15 N/mm² |
| Flexural Strength after freeze/thaw cycles (EN 12808-3) | ≥ 2.5 N/mm² |
| Compressive Strength after freeze/thaw cycles (EN 12808-3) | ≥ 15 N/mm² |
| Abrasion Resistance (EN 12808-2) | ≤ 1000 mm³ |
| Shrinkage (EN 12808-4) | ≤ 3 mm/m |
| Water Absorption (EN 12808-5) | ≤ 2 g / ≤ 5 g (30 min / 4 h) |
| Service Temperature Range (after final cure) | -30°C to +80°C |
Rapid Setting Flexible Grout
Product Overview
A rapid-setting, cement-based flexible grout for joint widths from 2 to 20 mm. It is formulated for high abrasion resistance and low water absorption, delivering durable performance in high-traffic and moisture-prone environments.
Recommended Applications
Packaging
Key Benefits
Technical Specifications
(at 23°C and 50% RH)
General Data
| Property | Details |
|---|---|
| Appearance | White and coloured powder |
| Shelf Life | 24 months when stored in original sealed packaging in a dry place |
Application Data
| Parameter | Value |
|---|---|
| Mixing Ratio | 1.1-1.2 liters water / 5 kg powder |
| Application Temperature Range | +5°C to +35°C |
| Pot Life | 1 hour |
| Set to Light Traffic | 1 day |
| Grouting after installation with normal adhesive | 4-8 hours |
| On walls bonded with fast-setting adhesive | 1-2 hours |
| On floors bonded with normal adhesive | 24 hours |
| On floors bonded with fast-setting adhesive | 3-4 hours |
| Set to Light Traffic (Pools) | 5 hours |
| Consumption | See consumption table depending on joint width and tile dimensions |
Performance Data
| Property | Value |
|---|---|
| Flexural Strength (EN 12808-3) | ≥ 5 N/mm² |
| Compressive Strength (EN 12808-3) | ≥ 10 N/mm² (6 hours); ≥ 25 N/mm² (28 days) |
| Flexural Strength after freeze/thaw cycles (EN 12808-3) | ≥ 5 N/mm² |
| Compressive Strength after freeze/thaw cycles (EN 12808-3) | ≥ 25 N/mm² |
| Abrasion Resistance (EN 12808-2) | ≤ 500 mm³ |
| Shrinkage (EN 12808-4) | ≤ 3 mm/m |
| Water Absorption (EN 12808-5) | ≤ 2 g (30 min) / ≤ 5 g (4 h) |
| Service Temperature Range (after final cure) | -30°C to +80°C |
Cement Based Grouting with High Temparature Resistance (1-6 mm)
Product Overview
A high-performance cementitious grout for 1-6 mm joints, engineered for elevated thermal exposure, heavy mechanical traffic, and routine chemical cleaning cycles.
Recommended Applications
Packaging
Key Benefits
Technical Specifications
(at 23°C and 50% RH)
General Data
| Property | Details |
|---|---|
| Appearance | White, beige and grey powder |
| Shelf Life | 12 months when stored in original sealed packaging in a dry place |
Application Data
| Parameter | Value |
|---|---|
| Application Temperature Range | +5°C to +35°C |
| Mixing Ratio | 4.1-4.5 lt water / 20 kg powder |
| Pot Life | 1 hour |
| Set to Light Traffic | 1 day |
| Consumption | See consumption table depending on joint width and tile dimensions |
Performance Data
| Property | Value |
|---|---|
| Flexural Strength after dry storage and freeze-thaw cycle (EN 12808-3) | ≥ 2.5 N/mm² |
| Compressive Strength after dry storage and freeze-thaw cycle (EN 12808-3) | ≥ 45 N/mm² |
| Abrasion Resistance (EN 12808-2) | ≤ 1000 mm³ |
| Shrinkage (EN 12808-4) | ≤ 3 mm/m |
| Water Absorption (EN 12808-5) | ≤ 2 g (30 min) / ≤ 5 g (240 min) |
Silicone Enhanced Flexible Grouting Mortar (2-20 mm)
Product Overview
A high-performance, silicone-enhanced cementitious grout for 2-20 mm joints, combining low water absorption with strong abrasion resistance for long-lasting interior and exterior use.
Recommended Applications
Packaging
Key Benefits
Technical Specifications
(at 23°C and 50% RH)
General Data
| Property | Details |
|---|---|
| Appearance | White and coloured powder |
| Shelf Life | Multi-ply paper bags: 12 months; polyethylene bags: 24 months when stored in original sealed packaging in a dry place |
Application Data
| Parameter | Value |
|---|---|
| Application Temperature Range | +5°C to +35°C |
| Mixing Ratio (20 kg powder) | 5.8-6.2 lt water (alternative data: 5.8-6.1 lt) |
| Mixing Ratio (5 kg powder) | 1.45-1.55 lt water |
| Pot Life | 30 minutes |
| Set to Light Traffic | 1 day |
| Consumption | See consumption table depending on joint width and tile dimensions |
Performance Data
| Property | Value |
|---|---|
| Flexural Strength (EN 12808-3) | ≥ 2.5 N/mm² |
| Compressive Strength (EN 12808-3) | ≥ 15 N/mm² |
| Flexural Strength after freeze/thaw cycles (EN 12808-3) | ≥ 2.5 N/mm² |
| Compressive Strength after freeze/thaw cycles (EN 12808-3) | ≥ 15 N/mm² |
| Abrasion Resistance (EN 12808-2) | ≤ 1000 mm³ |
| Shrinkage (EN 12808-4) | ≤ 3 mm/m |
| Water Absorption (EN 12808-5) | ≤ 2 g (30 min) / ≤ 5 g (4 h) |
| Service Temperature Range (after final cure) | -30°C to +80°C |
Silicone Enhanced Flexible Grouting Mortar for Pools
Product Overview
A high-performance cementitious flexible grout for 1-6 mm joints, designed with low water absorption and excellent abrasion resistance for wet and high-use environments.
Recommended Applications
Packaging
Key Benefits
Technical Specifications
(at 23°C and 50% RH)
General Data
| Property | Details |
|---|---|
| Appearance | White and coloured powder |
| Shelf Life | Multi-ply paper bags: 12 months; polyethylene bags: 24 months when stored in original sealed packaging in a dry place |
Application Data
| Parameter | Value |
|---|---|
| Mixing Ratio (20 kg powder) | 5.8-6.4 liters water (alternative data sheet value: 5.8-6.0 liters) |
| Mixing Ratio (5 kg powder) | 1.45-1.6 liters water |
| Application Temperature Range | +5°C to +35°C |
| Pot Life | 1 hour |
| Set to Light Traffic | 1 day |
| Consumption | See consumption table based on joint width and tile dimensions |
Performance Data
| Property | Value |
|---|---|
| Flexural Strength (EN 12808-3) | ≥ 2.5 N/mm² |
| Compressive Strength (EN 12808-3) | ≥ 15 N/mm² |
| Flexural Strength after freeze/thaw cycles (EN 12808-3) | ≥ 2.5 N/mm² |
| Compressive Strength after freeze/thaw cycles (EN 12808-3) | ≥ 15 N/mm² |
| Abrasion Resistance (EN 12808-2) | ≤ 1000 mm³ |
| Shrinkage (EN 12808-4) | ≤ 3 mm/m |
| Water Absorption (EN 12808-5) | ≤ 2 g (30 min) / ≤ 5 g (4 h) |
| Service Temperature Range (after final cure) | -30°C to +80°C |
Silicone Enhanced Flexible Grouting Mortar 2700 (2-20 mm)
Product Overview
A dust-free, silicone-enhanced cementitious grout designed for 2-20 mm joints. It combines high abrasion resistance with low water absorption, making it a reliable option for both interior and exterior applications exposed to moisture and traffic.
Recommended Applications
Packaging
Key Benefits
Technical Specifications
(at 23°C and 50% RH)
General Data
| Property | Details |
|---|---|
| Appearance | White and coloured powder |
| Shelf Life | 12 months when stored in original sealed packaging in a dry place |
Application Data
| Parameter | Value |
|---|---|
| Application Temperature Range | +5°C to +35°C |
| Mixing Ratio | 5.2-6.0 liters water / 20 kg powder |
| Pot Life | 30 minutes |
| Set to Light Traffic | 1 day |
| Consumption | See consumption table depending on joint width and tile dimensions |
Performance Data
| Property | Value |
|---|---|
| Flexural Strength (after 28 days) (EN 12808-3) | ≥ 2.5 N/mm² |
| Compressive Strength (after 28 days) (EN 12808-3) | ≥ 15 N/mm² |
| Flexural Strength (after freeze/thaw cycles) (EN 12808-3) | ≥ 2.5 N/mm² |
| Compressive Strength (after freeze/thaw cycles) (EN 12808-3) | ≥ 15 N/mm² |
| Abrasion Resistance (EN 12808-2) | ≤ 1000 mm³ |
| Shrinkage (EN 12808-4) | ≤ 3 mm/m |
| Water Absorption (EN 12808-5) | ≤ 2 g (30 min) / ≤ 5 g (4 h) |
| Service Temperature Range (after final cure) | -40°C to +80°C |
Flexible Grouting Mortar (1-6 mm)
Product Overview
A high-performance cementitious flexible grout for 1-6 mm joints, developed for low water absorption and reliable abrasion resistance in both interior and exterior applications.
Recommended Applications
Packaging
Key Benefits
Technical Specifications
(at 23°C and 50% RH)
General Data
| Property | Details |
|---|---|
| Appearance | White and coloured powder |
| Shelf Life | Multi-ply paper bags: 12 months; polyethylene bags: 24 months when stored in original sealed packaging in a dry place |
Application Data
| Parameter | Value |
|---|---|
| Mixing Ratio (20 kg powder) | 5.8-6.4 liters water |
| Mixing Ratio (5 kg powder) | 1.45-1.60 liters water |
| Application Temperature Range | +5°C to +35°C |
| Pot Life | 1 hour |
| Set to Light Traffic | 1 day |
| Consumption | See consumption table depending on joint width and tile dimensions |
Performance Data
| Property | Value |
|---|---|
| Flexural Strength (EN 12808-3) | ≥ 2.5 N/mm² |
| Compressive Strength (EN 12808-3) | ≥ 15 N/mm² |
| Flexural Strength after freeze/thaw cycles (EN 12808-3) | ≥ 2.5 N/mm² |
| Compressive Strength after freeze/thaw cycles (EN 12808-3) | ≥ 15 N/mm² |
| Abrasion Resistance (EN 12808-2) | ≤ 1000 mm³ |
| Shrinkage (EN 12808-4) | ≤ 3 mm/m |
| Water Absorption (EN 12808-5) | ≤ 2 g (30 min) / ≤ 5 g (4 h) |
| Service Temperature Range (after final cure) | -30°C to +80°C |
Ready to Use Flexible Grouting Mortar (1 - 6 mm)
Product Overview
A ready-to-use, acrylic-based flexible grout paste for 1-6 mm joints. Its water-repellent structure and smooth consistency support clean, reliable, and efficient joint finishing.
Recommended Applications
Packaging
Key Benefits
Technical Specifications
(at 23°C and 50% RH)
General Data
| Property | Details |
|---|---|
| Appearance | White, beige and grey coloured paste |
| Density | 1.7 ± 0.1 kg/dm³ |
| Dry Solids Content | ≥ 85% |
| pH | 8.0 ± 0.5 |
| Shelf Life | 12 months when stored in original sealed packaging in a dry place |
Application Data
| Parameter | Value |
|---|---|
| Application Temperature Range | +10°C to +35°C |
| Set to Light Traffic | > 48 hours |
| Consumption | See epoxy and acrylic consumption table depending on joint width and tile dimensions |
Performance Data
| Property | Value |
|---|---|
| Resistance to Ageing | Good |
| Flexibility | High |
| Hardness (Shore D) | > 50 |
| Service Temperature Range (after final cure) | -15°C to +70°C |
Epoxy Easy to Clean Grout
Product Overview
A three-component, solvent-free epoxy grout engineered for chemically demanding environments. It delivers high chemical and mechanical resistance, together with a dense, smooth finish that is easier to clean and maintain.
Recommended Applications
Packaging
Key Benefits
Technical Specifications
(at 23°C and 50% RH)
General Data
| Property | Details |
|---|---|
| Appearance - Component A | White, grey, beige viscose liquid |
| Appearance - Component B | Yellow-green transparent liquid |
| Appearance - Component C | Off-white powder |
| Shelf Life | 12 months when stored in original sealed packing in a cool, dry place |
| Components (A/B/C) | Epoxy resin / Hardener / Filler |
Application Data
| Parameter | Value |
|---|---|
| Application Temperature Range | +10°C to +27°C |
| Pot Life | 60 minutes at 25°C |
| Ready for Use (Max. Chemical Resistance) | 7 hours |
| Set to Foot Traffic | 24 hours |
| Consumption | As a grout, see epoxy grout consumption table |
Performance Data
| Property | Value |
|---|---|
| Flexural Strength (EN 12808-3) | ≥ 30 N/mm² |
| Compressive Strength (EN 12808-3) | ≥ 45 N/mm² |
| Abrasion Resistance (EN 12808-2) | ≤ 250 mm³ |
| Shrinkage (EN 12808-4) | ≤ 1.5 mm/m |
| Water Absorption (after 240 min) (EN 12808-5) | ≤ 0.1 g |
| Service Temperature Range (after final cure) | -20°C to +80°C |
| Release of Dangerous Substances | See SDS |
Chemical Resistant Epoxy Grout and Adhesive
Product Overview
A three-component, solvent-free epoxy system developed for both grouting and bonding in chemically aggressive environments. It provides excellent mechanical durability and a dense, easy-to-clean final surface.
Recommended Applications
Packaging
Key Benefits
Technical Specifications
(at 23°C and 50% RH)
General Data
| Property | Details |
|---|---|
| Appearance - Component A | White, grey, beige viscose liquid |
| Appearance - Component B | Yellow-green transparent liquid |
| Appearance - Component C | Off-white powder |
| Shelf Life | 12 months when stored in original sealed packing in a cool, dry place |
| Components (A/B/C) | Epoxy resin / Hardener / Filler |
Application Data
| Parameter | Value |
|---|---|
| Application Temperature Range | +10°C to +27°C |
| Pot Life | 60 minutes at 25°C |
| Ready for Use (Max. Chemical Resistance) | 7 hours |
| Set to Foot Traffic | 24 hours |
| Consumption | As a grout, see epoxy grout consumption table |
Performance Data
| Property | Value |
|---|---|
| Shear Adhesion Strength (EN 12003) - Initial | ≥ 15 N/mm² |
| Shear Adhesion Strength (EN 12003) - After immersion in water | ≥ 15 N/mm² |
| Shear Adhesion Strength (EN 12003) - After thermal shock | ≥ 10 N/mm² |
| Flexural Strength (EN 12808-3) | ≥ 30 N/mm² |
| Compressive Strength (EN 12808-3) | ≥ 45 N/mm² |
| Abrasion Resistance (EN 12808-2) | ≤ 250 N/mm³ |
| Shrinkage (EN 12808-4) | ≤ 1.5 mm/m |
| Water Absorption (after 240 min) (EN 12808-5) | ≤ 0.10 g |
| Service Temperature Range (after final cure) | -20°C to +80°C |
| Release of Dangerous Substances | See SDS |
| Reaction to Fire | Bs1d0 |
Ready to Use Joint Repair Paste
Product Overview
A ready-to-use repair paste based on acrylic resin, enhanced with silicone for flexibility. It is formulated for 1–6 mm interior joints, helping restore cracked, stained, or collapsed grout lines without the mess of mixing powder on site.
Recommended Applications
Packaging
Key Benefits
Technical Specifications
Reference conditions: 23°C and 50% relative humidity.
General Data
| Property | Details |
|---|---|
| Appearance | White paste |
| Shelf Life | 24 months when stored in original sealed packaging in a dry place |
Application Data
| Parameter | Value |
|---|---|
| Application Temperature | +5°C to +35°C |
| Setting Time in Joint | 10–15 minutes |
| Ready for Foot Traffic | ∼ 4 hours |
Grout Joint Painter
Product Overview
A ready-to-use, acrylic emulsion–based grout paint, silicone enhanced for easier cleaning. It is designed for interior use to refresh, recolour, and rejuvenate cementitious grout lines quickly and with minimal disruption.
Recommended Applications
Packaging
Key Benefits
Technical Specifications
(at 23°C and 50% RH)
General Data
| Property | Details |
|---|---|
| Appearance | White, grey, and Cappadocia beige paint |
| Density | 1.28 g/cm³ |
| Shelf Life | 24 months when stored in original sealed packaging in a dry place |
Application Data
| Parameter | Value |
|---|---|
| Application Temperature | +5°C to +30°C |
| Wait Before Wet Cleaning Tiled Surfaces | 24 hours |
| Ready for Foot Traffic | ∼ 2 hours |
Cement Remover
Product Overview
An acidic cleaning formulation for removing cement and mortar residues from acid-resistant tiled and coated surfaces. It is designed to dissolve and lift hardened build-up effectively while minimising offensive fumes during use.